Woodworking Tools For Pre

Where to woodworking machines

Operations procedure on production of the supporting framework which will represent a lattice from wooden whetstones 50100 millimeters thick, following:

Work at an equal surface, for example, on a floor. So you will be able to record all elements of a frame in one plane.

For production of basic elements of a design (a table-top, boards and legs) the mahogany, an oak and an ash-tree are considered as the best materials. Tables also do of soft breeds, such as an alder and a linden. Their quality and cost is respectively lower.

That the bearing design had high rigidity, it has to have at least three stiffening ribs.

If use of spheres with a diameter of 60 millimeters is supposed, height of a board has to make about 37 millimeters.

Racks can be equipped with rubber slips or rollers that they did not scratch a floor, and the table could be moved easily.

Cutting of the sheet chipboard can be executed directly upon purchase of a product. The cost of such service is low, thus on the professional equipment of the master will cut out a leaf strictly by the demanded sizes and with high precision.

The board is considered decorative part of a billiard table and consists of several elements: the main beam and the lath fitted by cloth with a rubber otboyny strip.

It was necessary to equip a product with legs, the order of their production looks so: