Cheap And Easy DIY Bench For A Screw

Router bits for a screw Bending plywood to make simple wood boxes

Paint will better lay down if before coloring of metal to wipe it the rag moistened in vinegar and to allow to dry.

Before a zabivaniye nailing, for prevention of split of wood, knock with a hammer on an edge nailing. The nail with the blunted edge will crumple and will break off fibers, but will not split wood.

Quality of polishing will be better if after the first cleaning by a coarse-grained skin to moisten a surface of a product with water. After that the surface of a product needs to be wiped along fibers a fine-grained skin.

In the absence of wallpaper nails, it is possible to use a combination - the office button + a nail.

Connection will be stronger at a zabivaniye of nails obliquely.

Length of nails should be chosen so that a nail having stitched a board through, entered whetstone not less, than at 2/3 lengths. Then connection will be reliable.

The nail will not be bent if to hold it with flat-nose pliers.

If nailing a hat or the head of the screw connecting two wooden details needs to be hidden, it can be made as follows: chip off a chisel a thin layer - literally wood shaving (but not up to the end) in that place where it is necessary to hammer a nail, and hammer it. Then drip glue and paste shaving into place. A hat nailing completely will disappear.

It is heavy to hammer a nail into strong breeds of a tree. Nails quite often bend, bringing a lot of trouble and spoiling appearance of a product. The usual candle will help here. It is enough to rub with wax an edge nailing - and it will enter much easier.

The surface of upholstered furniture needs to be wiped more often vinegar solution, it refreshes it and if to rub wooden elements of furniture with mix of vinegar and vegetable oil in equal parts, small scratches on a product will disappear.

If the screw badly gets out of wood, apply the heated subject to its head: the screw will extend and when cools down, it can be taken easily

To pull out a nail from wood without having damaged its surface, it is necessary to enclose wooden whetstone under pincers or a nail-catcher.

It is better to hammer long nails with a hammer weighing 400 - 500 grams, and small a small hammer to 250 grams.